Template

SHORT DESCRIPTION OF THE RC UNIT. NAMEOFMANUFACTURER.

Versions

Version 1 

Setting Failsafe

Set failsafe in Flight Controller

Openpilot GCS failsafe setup https://www.youtube.com/watch?v=wHyeY3TSTuo

Cleanflight failsafe setup https://www.youtube.com/watch?v=dikr9oDzQqc

Set failsafe on receivers with failsafe built in

See also Lemon Rx set #Failsafe

See also on OrangeRX R616XN Review https://www.youtube.com/watch?v=UUzjYCzqsxQ

Video Transmitter

Important! - Always make sure your VTx antenna is attached before powering up your RC unit. Running it without the antenna can result in VTx failure.

Parts & Accessories

Suggested list of parts and accessories

Accessories

B6AC Charger BANGGOOD or Turnigy Reaktor Charger HOBBYKING

FPV Goggles or Display

Action Camera

Batteries to power up VRx

OpenPilot

PIDS

PIDS are highly dependent on flight setup, which includes props, battery size, externally mounted camera, etc. and also when new firmware versions are released. With each component change, the values in gyro filters and/or other features will be needed to tune again. The user postings of PIDS is to provide an approximate value covering a specific flight setup, so that pilots can tune further from there.

BetaFlight

PIDS

PIDS are highly dependent on flight setup, which includes props, battery size, externally mounted camera, etc. and also when new firmware versions are released. With each component change, the values in gyro filters and/or other features will be needed to tune again. The user postings of PIDS is to provide an approximate value covering a specific flight setup, so that pilots can tune further from there.