Template

From WikiRotors
Jump to: navigation, search

To use this template:

  1. Create a new page. You can do this by searching on the upper right corner of this page for the RC item you'd like to create a page for. For example, to create a new page for a RC car named RUSTYV2, search by typing the term RUSTYV2 in the search bar. If the page RUSTYV2 does not exist, you will be given the option to create a page for RUSTYV2 in the search results.
  2. click Edit on the upper right corner of this Template page
  3. copy the text below
  4. paste the text in the new page just created


SHORT DESCRIPTION OF THE RC UNIT. NAMEOFMANUFACTURER.

Features

Package Included

Versions

Version 1 

Getting Started

Setting Failsafe

Set failsafe in Flight Controller

Openpilot GCS failsafe setup https://www.youtube.com/watch?v=wHyeY3TSTuo
Cleanflight failsafe setup https://www.youtube.com/watch?v=dikr9oDzQqc

Set failsafe on receivers with failsafe built in

See also Lemon Rx set #Failsafe
See also on OrangeRX R616XN Review [1] https://www.youtube.com/watch?v=UUzjYCzqsxQ

Video Transmitter

Important! - Always make sure your VTx antenna is attached before powering up your RC unit. Running it without the antenna can result in VTx failure.

VTx Frequencies

Parts & Accessories

Suggested list of parts and accessories

Replacement Parts

Accessories

B6AC Charger BANGGOOD or Turnigy Reaktor Charger HOBBYKING
FPV Goggles or Display
Action Camera
Batteries to power up VRx

Receiver

PWM Receiver Connections

Transmitter

OpenPilot

PIDS

PIDS are highly dependent on flight setup, which includes props, battery size, externally mounted camera, etc. and also when new firmware versions are released. With each component change, the values in gyro filters and/or other features will be needed to tune again. The user postings of PIDS is to provide an approximate value covering a specific flight setup, so that pilots can tune further from there.

BetaFlight

Firmware Installation

PIDS

PIDS are highly dependent on flight setup, which includes props, battery size, externally mounted camera, etc. and also when new firmware versions are released. With each component change, the values in gyro filters and/or other features will be needed to tune again. The user postings of PIDS is to provide an approximate value covering a specific flight setup, so that pilots can tune further from there.

Receiver Channels

Multicolor LEDs

Extras

Mods

Troubleshooting

References

  1. From Painless360 on YouTube: https://www.youtube.com/channel/UCp1vASX-fg959vRc1xowqpw