Difference between revisions of "Eachine Falcon 180"

From WikiRotors
Jump to navigation Jump to search
(Removed nonverified parts)
Line 36: Line 36:
  
 
=== Accessories ===
 
=== Accessories ===
: AOMWAY 5.8Ghz RP-SMA-Male Antenna for the Video Transmitter and Video Receiver [http://www.banggood.com/AOMWAY-5_8G-3dBi-RP-SMA-Male-Four-Lobe-RHCP-VTxVRx-FPV-Antenna-p-978264.html BANGGOOD]
 
: Aomway 5.8GHz FPV 4 Leaf Clover AV Transmission RHCP Antenna 1 Pair for the Video Transmitter and Video Receiver [http://www.banggood.com/Aomway-5_8GHz-FPV-4-Leaf-Clover-AV-Transmission-RHCP-Antenna-1-Pair-p-961730.html BANGGOOD]
 
 
: B6AC Charger [http://www.banggood.com/SKYRC-iMAX-B6AC-V2-Professional-Balance-ChargerDischarger-SK-100090-p-945684.html BANGGOOD] or Turnigy Reaktor Charger [http://hobbyking.com/hobbyking/store/__44112__Turnigy_Reaktor_300W_20A_6S_Balance_Charger.html HOBBYKING]
 
: B6AC Charger [http://www.banggood.com/SKYRC-iMAX-B6AC-V2-Professional-Balance-ChargerDischarger-SK-100090-p-945684.html BANGGOOD] or Turnigy Reaktor Charger [http://hobbyking.com/hobbyking/store/__44112__Turnigy_Reaktor_300W_20A_6S_Balance_Charger.html HOBBYKING]
 
: Prop Balancer [http://www.banggood.com/ATG-A-1-Propeller-Balancer-Magnetic-Essential-For-Quadcopter-FPV-Prop-p-78478.html BANGGOOD]
 
: Prop Balancer [http://www.banggood.com/ATG-A-1-Propeller-Balancer-Magnetic-Essential-For-Quadcopter-FPV-Prop-p-78478.html BANGGOOD]
 
: Lipo Safety Charge Bag [http://www.banggood.com/RC-lipo-Safty-BagLipo-Gurad-Bag-For-Charging1857560mm-p-938751.html BANGGOOD]
 
: Lipo Safety Charge Bag [http://www.banggood.com/RC-lipo-Safty-BagLipo-Gurad-Bag-For-Charging1857560mm-p-938751.html BANGGOOD]
: Eachine 5.8Ghz Video Receiver [http://www.banggood.com/Eachine-FPV-5_8G-32CH-Wireless-AV-Receiver-RC832-p-975426.html BANGGOOD] or FR632 With Diversity Video Receiver [http://www.surveilzone.com/FR632-58GHz-32-Channel-Diversity-Wireless-AV-Receiver-g-1406 SURVEILZONE]
 
: OrangeRx R616XN DSM2/DSMX Compatible 6CH CPPM Nano Receiver with Failsafe [http://www.hobbyking.com/hobbyking/store/__73005__OrangeRx_R616XN_DSM2_DSMX_Compatible_6CH_CPPM_Nano_Receiver_with_Failsafe HOBBYKING]
 
: Quanum DIY FPV Goggle V2 w/5 inch LCD Monitor (Kit) [http://www.hobbyking.com/hobbyking/store/__78125__Quanum_DIY_FPV_Goggle_V2_w_5_inch_LCD_Monitor_Kit_.html HOBBYKING]
 
 
: FPV Goggles or Display
 
: FPV Goggles or Display
 
: Action Camera
 
: Action Camera

Revision as of 12:11, 12 May 2016

Falcon 180 is a UAV developed by the Chinese company Eachine.

Features

Package Included

Versions

Version 1 

Getting Started

Setting Failsafe

Set failsafe in Flight Controller

Openpilot GCS failsafe setup https://www.youtube.com/watch?v=wHyeY3TSTuo
Cleanflight failsafe setup https://www.youtube.com/watch?v=dikr9oDzQqc

Set failsafe on receivers with failsafe built in

See also Lemon Rx set #Failsafe
See also on OrangeRX R616XN Review [1] https://www.youtube.com/watch?v=UUzjYCzqsxQ

Video Transmitter

Important! - Always make sure your VTx antenna is attached before powering up your Eachine Falcon 180. Running it without the antenna can result in VTx failure.


VTx Frequencies

Parts & Accessories

Suggested list of parts and accessories

Replacement Parts

Accessories

B6AC Charger BANGGOOD or Turnigy Reaktor Charger HOBBYKING
Prop Balancer BANGGOOD
Lipo Safety Charge Bag BANGGOOD
FPV Goggles or Display
Action Camera
Batteries to power up VRx

Receiver

PWM Receiver Connections

Transmitter

OrangeRx R616XN PPM Receiver Binding
FlySky i6 (Eachine i6) Set Tx Failsafe

OpenPilot

PIDS

PIDS are highly dependent on flight setup, which includes props, battery size, externally mounted camera, etc. and also when new firmware versions are released. With each component change, the values in gyro filters and/or other features will be needed to tune again. The user postings of PIDS is to provide an approximate value covering a specific flight setup, so that pilots can tune further from there.

BetaFlight

Firmware Installation

PIDS

PIDS are highly dependent on flight setup, which includes props, battery size, externally mounted camera, etc. and also when new firmware versions are released. With each component change, the values in gyro filters and/or other features will be needed to tune again. The user postings of PIDS is to provide an approximate value covering a specific flight setup, so that pilots can tune further from there.


Receiver Channels

Multicolor LEDs

Extras

Mods

Troubleshooting

BetaFlight Mini USB Port Connection Issues

References