Difference between revisions of "Eachine Falcon 180"
m (Removal of affiliate links) |
|||
| Line 52: | Line 52: | ||
=== PWM Receiver Connections === | === PWM Receiver Connections === | ||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
== Transmitter == | == Transmitter == | ||
Revision as of 12:10, 12 May 2016
Falcon 180 is a UAV developed by the Chinese company Eachine.
Contents
Features
Package Included
Versions
- Version 1
Getting Started
Setting Failsafe
Set failsafe in Flight Controller
- Openpilot GCS failsafe setup https://www.youtube.com/watch?v=wHyeY3TSTuo
- Cleanflight failsafe setup https://www.youtube.com/watch?v=dikr9oDzQqc
Set failsafe on receivers with failsafe built in
- See also Lemon Rx set #Failsafe
- See also on OrangeRX R616XN Review [1] https://www.youtube.com/watch?v=UUzjYCzqsxQ
Video Transmitter
Important! - Always make sure your VTx antenna is attached before powering up your Eachine Falcon 180. Running it without the antenna can result in VTx failure.
VTx Frequencies
Parts & Accessories
Suggested list of parts and accessories
Replacement Parts
Accessories
- AOMWAY 5.8Ghz RP-SMA-Male Antenna for the Video Transmitter and Video Receiver BANGGOOD
- Aomway 5.8GHz FPV 4 Leaf Clover AV Transmission RHCP Antenna 1 Pair for the Video Transmitter and Video Receiver BANGGOOD
- B6AC Charger BANGGOOD or Turnigy Reaktor Charger HOBBYKING
- Prop Balancer BANGGOOD
- Lipo Safety Charge Bag BANGGOOD
- Eachine 5.8Ghz Video Receiver BANGGOOD or FR632 With Diversity Video Receiver SURVEILZONE
- OrangeRx R616XN DSM2/DSMX Compatible 6CH CPPM Nano Receiver with Failsafe HOBBYKING
- Quanum DIY FPV Goggle V2 w/5 inch LCD Monitor (Kit) HOBBYKING
- FPV Goggles or Display
- Action Camera
- Batteries to power up VRx
Receiver
PWM Receiver Connections
Transmitter
OrangeRx R616XN PPM Receiver Binding
FlySky i6 (Eachine i6) Set Tx Failsafe
OpenPilot
PIDS
PIDS are highly dependent on flight setup, which includes props, battery size, externally mounted camera, etc. and also when new firmware versions are released. With each component change, the values in gyro filters and/or other features will be needed to tune again. The user postings of PIDS is to provide an approximate value covering a specific flight setup, so that pilots can tune further from there.
BetaFlight
Firmware Installation
PIDS
PIDS are highly dependent on flight setup, which includes props, battery size, externally mounted camera, etc. and also when new firmware versions are released. With each component change, the values in gyro filters and/or other features will be needed to tune again. The user postings of PIDS is to provide an approximate value covering a specific flight setup, so that pilots can tune further from there.
Receiver Channels
Multicolor LEDs
Extras
Mods
Troubleshooting
BetaFlight Mini USB Port Connection Issues
References
- ↑ From Painless360 on YouTube: https://www.youtube.com/channel/UCp1vASX-fg959vRc1xowqpw
